D-Link DGS-3130 Emulator - Page 850
switch-config.cfg
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 850 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# copy tftp: //10.1.1.254/switch-config.cfg running-config Address of remote host []? 10.1.1.254 Source filename []? switch-config.cfg Destination filename running-config? [y/n]: y Accessing tftp://10.1.1.254/switch-config.cfg... Transmission start... Transmission finished, file length 45421 bytes. Executing script file switch-config.cfg ...... Executing done Switch# This example shows how to upload the running configuration to the TFTP server for storage. Switch# copy running-config tftp: //10.1.1.254/switch-config.cfg Address of remote host []? 10.1.1.254 Destination filename []? switch-config.cfg Accessing tftp://10.1.1.254/switch-config.cfg... Transmission start... Transmission finished, file length 45421 bytes. Switch# This example shows how to save the system's running configuration into the FLASH memory and uses it as the next boot configuration. Switch# copy running-config startup-config Destination filename startup-config? [y/n]: y Saving all configurations to NV-RAM.......... Done. Switch# This example shows how to execute the "switch-config.cfg" file in the NVRAM immediately by using the increment method. Switch# copy flash: switch-config.cfg running-config Source filename [switch-config.cfg]? Destination filename running-config? [y/n]: y Executing script file switch-config.cfg ...... Executing done Switch# This example shows how to download an image file from the TFTP server to all units in the stack. 846