D-Link DGS-3130 Emulator - Page 289

Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode DHCPv6 Pool Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to specify a local IPv6 prefix pool in a IPv6 DHCP pool to delegate the prefix for clients serviced by the DHCP pool. Only one local IPv6 prefix pool can be specified in an IPv6 DHCP pool. When the server receives a request from a client, the server will check the IPv6 DHCP pool associated with the received interface. If static binding prefix entries are defined to delegate the prefix for the request client, the static binding prefix will be delegated. Otherwise, the server will delegate the prefix from the local IPv6 prefix pool specified for the IPv6 DHCP pool. Example This example shows how to configure a local IPv6 prefix pool named "prefix-pool", specify the pool in an IPv6 DHCP pool named "pool1" and associate the IPv6 DHCP pool with VLAN 100. Switch# configure terminal Switch(config)# ipv6 local pool prefix-pool 3004:DB8::/48 64 Switch(config)# ipv6 dhcp pool pool1 Switch(config-dhcp)# prefix-delegation pool prefix-pool lifetime 300 200 Switch(config-dhcp)# exit Switch(config)# interface vlan 100 Switch(config-if)# ipv6 dhcp server pool1 Switch(config-if)# 25-12 service ipv6 dhcp This command is used to enable the IPv6 DHCP server and relay service on the Switch. Use the no form of this command to disable the IPv6 DHCP server and relay service. service ipv6 dhcp no service ipv6 dhcp Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. 285