D-Link DGS-3130 Emulator - Page 705
ip rip receive version
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 705 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide ip rip authentication text-password PASSWORD no ip rip authentication text-password Parameters PASSWORD Specifies a password string. Default None. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enable authentication for RIP version 2 packets and to specify the key that can be used on an interface. Example This example shows how to configure authentication on interface VLAN 3. Switch# configure terminal Switch(config)# interface vlan 3 Switch(config-if)# ip rip authentication mode text Switch(config-if)# ip rip authentication text-password test1 Switch(config-if)# 68-6 ip rip receive version This command is used to specify a RIP version to receive on an interface basis. Use the no form of this command to revert to the default setting. ip rip receive version [1] [2] no ip rip receive version Parameters 1 2 (Optional) Specifies to accept RIP version 1 packets. (Optional) Specifies to accept RIP version 2 packets. Default By default, the global setting will be used. Command Mode Interface Configuration Mode. 701
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/705.png)