D-Link DGS-3130 Emulator - Page 746

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 73. Secure Sockets Layer (SSL) Commands 73-1 no certificate This command is used to delete the imported certificate. no certificate NAME Parameters NAME Specifies the name of the certificate to be deleted. Default None. Command Mode Certificate Chain Configuration Mode. Command Default Level Level: 15. Usage Guideline Use the show crypto pki trustpoints command to get a name list of imported certificates. Then use this command to delete the imported certificates of a trust point. If the specified certificate is a local certificate the corresponding private key will be deleted at the same time. Example This example shows how to delete an imported certificate named tongken.ca of the trust point gaa. Switch# show crypto pki trustpoints Trustpoint Name : gaa (primary) Imported certificates: CA : tongken.ca local certificate : webserver.crt local private key : webserver.prv Switch# configure terminal Switch(config)# crypto pki certificate chain gaa Switch(config-cert-chain)# no certificate tongken.ca Switch(config-cert-chain)# 73-2 crypto pki import pem This command is used to import the CA certificate or the Switch certificate and keys to a trust-point from privacyenhanced mail (PEM)-formatted files. crypto pki import TRUSTPOINT pem FILE-SYSTEM:/[DIRECTORY/]FILE-NAME [password PASSWORDPHRASE] {ca | local | both} crypto pki import TRUSTPOINT pem tftp://IP-ADDRESS/[DIRECTORY/]FILE-NAME [password PASSWORD-PHRASE] {ca | local | both} 742