D-Link DGS-3130 Emulator - Page 357
Ethernet Ring Protection Switching ERPS, Commands
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 357 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 33. Ethernet Ring Protection Switching (ERPS) Commands 33-1 description This command is used to specify a string that serves as a description for a G.8032 Ethernet ring instance. description DESCRIPTION Parameters DESCRIPTION Specifies the description for a G.8032 Ethernet ring instance with a maximum of 64 characters. Default None. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to set the description string for an ERPS instance. Example This example shows how to create an ERPS instance 1 in the physical ring named "major-ring" and add a description for the instance. Switch#configure terminal Switch(config)#ethernet ring g8032 major-ring Switch(config-erps-ring)#instance 1 Switch(config-erps-ring-instance)#description major-ring instance 1 Switch(config-erps-ring-instance)# 33-2 ethernet ring g8032 This command is used to create a G.8032 physical ring and enter the ERPS configuration mode. Use the no form of this command to delete the G.8032 physical ring. ethernet ring g8032 RING-NAME no ethernet ring g8032 RING-NAME Parameters RING-NAME Specifies the name of the G.8032 ring with a maximum of 32 characters. 353