D-Link DGS-3130 Emulator - Page 64

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 4-18 show access-group This command is used to display access group information for interface(s). show access-group [interface INTERFACE-ID] Parameters interface INTERFACE-ID (Optional) Specifies the interface to be displayed. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline If interface is not specified, all of the interfaces that have access list configured will be displayed. Example This example shows how to display access lists that are applied to all of the interfaces. Switch# show access-group eth1/0/1: Inbound mac access-list : simple-mac-acl(ID: 7998) Inbound ip access-list : simple-ip-acl(ID: 1998) Switch# 4-19 show access-list This command is used to display the access list configuration information. show access-list [ip [NAME] | mac [NAME] | ipv6 [NAME]] Parameters ip mac ipv6 NAME (Optional) Specifies to display a listing of all IP access lists. (Optional) Specifies to display a listing of all MAC access lists. (Optional) Specifies to display a listing of all IPv6 access lists. (Optional) Specifies to the name of the access list to be displayed. Default None. 60