D-Link DGS-3130 Emulator - Page 112
radius-server deadtime
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide login authentication {default | METHOD-LIST} no login authentication Parameters default METHOD-LIST Specifies to authenticate based on the default method list. Specifies the name of the method list to use. Default By default, the default method list is used. Command Mode Line Configuration Mode. Command Default Level Level: 15. Usage Guideline For authentication via the method list to take effect, enable AAA first by using the aaa new-model command. Create the method list first by using the aaa authentication login command. If the method list does not exist, the command does not take effect and the authentication will be done via the default login method list. When aaa new-model is enabled, the default method list is used for authentication. Example This example shows how to set the local console line to use the method list "CONSOLE-LINE-METHOD" for login authentication. Switch#configure terminal Switch(config)# aaa authentication login CONSOLE-LINE-METHOD group group2 local Switch(config)# line console Switch(config-line)# login authentication CONSOLE-LINE-METHOD Switch(config-line)# 8-22 radius-server deadtime This command is used to specify the default duration of the time to skip the unresponsive server. Use the no form of this command to revert to the default setting. radius-server deadtime MINUTES no radius-server deadtime Parameters MINUTES Specifies the dead time. The valid range is 0 to 1440 (24 hours). When the setting is 0, the unresponsive server will not be marked as dead. Default By default, this value is 0. 108
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/112.png)