D-Link DGS-3130 Emulator - Page 364
profile
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
Parameters INSTANCE-ID DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Specifies the identifier of an ERPS instance. The valid range is from 1 to 32. Default None. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to configure a sub-ring instance connected to another ring instance. This command is applied on the interconnection node. Example This example shows how to configure the physical ring named "ring2" instance 1 as a sub-ring of "ring1" instance 2 Switch# configure terminal Switch(config)# ethernet ring g8032 ring2 Switch(config-erps-ring)# instance 1 Switch(config-erps-ring-instance)# exit Switch(config-erps-ring)# exit Switch(config)# ethernet ring g8032 ring1 Switch(config-erps-ring)#instance 2 Switch(config-erps-ring-instance)# sub-ring instance 1 Switch(config-erps-ring-instance)# 33-11 profile This command is used to associate an ERPS instance with a G.8032 profile. Use the no form of this command to remove the association. profile PROFILE-NAME no profile Parameters PROFILE-NAME Specifies the name of the G.8032 profile to be associated with the ERPS instance. Default None. Command Mode ERPS Instance Configuration Mode. 360