D-Link DGS-3130 Emulator - Page 703

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Default By default, this value is 0. Command Mode Router Configuration Mode. Router Address Family Configuration (RIP) Mode. Command Default Level Level: 12. Usage Guideline The default metric is used in redistributing routes from other routing protocols. The routes being redistributed are learned by other protocols and have incompatible metric as RIP. The specifying of the metric allows the metric to be synced. Example This example shows how to configure the default metric 5 for redistribute the OSPF routes. In other words, assigns the OSPF-derived routes a RIP metric of 5. Switch# configure terminal Switch(config)# router rip Switch(config-router)# default-metric 5 Switch(config-router)# redistribute ospf Switch(config-router)# 68-3 distance (RIP) This command is used to define an administrative distance of routes learned by IPv4 routing protocols. Use the no form of this command to revert to the default setting. distance DISTANCE no distance Parameters DISTANCE Specifies the administrative distance. The range is from 1 to 255. The lower value represents a better route. Default By default, the RIP distance is 100. Command Mode Router Configuration Mode. Command Default Level Level: 12. 699