D-Link DGS-3130 Emulator - Page 612
snmp-server enable traps port-security
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 612 highlights
Parameters DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide interface INTEFACE-ID , address vlan VLAN-ID . - (Optional) Specifies the ID of the interface to be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. (Optional) Specifies to display all the secure MAC addresses, including both configured and learned entries. (Optional) Specifies to display port security settings for the VLAN. (Optional) Specifies a series of VLANs, or separate a range of VLANs from a previous range. No space is allowed before and after the comma. (Optional) Specifies a range of VLANs. No space is allowed before and after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command is used to display the current port security settings. Example This example shows how to display the port security settings of interfaces Ethernet 1/0/1 to 1/0/3. Switch#show port-security interface ethernet 1/0/1-3 D:Delete-on-Timeout P:Permanent Interface Max Curr Violation Violation Security Admin Current No. No. No. Act. Count Mode State State eth1/0/1 5 2 Restrict 0 D Enabled Forwarding eth1/0/2 10 10 Shutdown 0 D Enabled Err-disabled eth1/0/3 10 0 Shutdown 0 P Disabled - Switch# 58-3 snmp-server enable traps port-security This command is used to enable the sending of SNMP notifications for port security address violations. Use the no form of this command to disable the sending of SNMP notifications. 608