D-Link DGS-3130 Emulator - Page 15
Command Mode, Command Default Level, Usage Guideline, Example, Parameters, Default
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Command Default Level Level: 1. Usage Guideline If the privileged level requires a password, enter it in the field provided. Only three attempts are allowed. Failure to access this level returns the user to the current level. Example This example shows how to change the privilege level of the active CLI login session to privilege level 12. Switch# show privilege Current privilege level is 2 Switch# enable 15 password:****** Switch# show privilege Current privilege level is 15 Switch# 2-3 disable This command is used to change the privilege level of the active CLI login session to a lower privilege level. disable [PRIVILEGE-LEVEL] Parameters PRIVILEGE-LEVEL (Optional) Specifies the privilege level. The range is from 1 to 15. If not specified, privilege level 1 will be used. Default None. Command Mode User/Privileged EXEC Mode. Command Default Level Level: 1. Usage Guideline This command is used to change the privilege level of the active CLI login session to a lower privilege level. 11