D-Link DGS-3130 Emulator - Page 709
redistribute RIP
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 709 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline If you disable the sending of routing updates on an interface, the router will not send multicast RIP packets out through the interface, however, the RIP packet from other routers received on this interface continue to be processed. Example This example shows how to disable the sending of routing updates on the interface VLAN 1. Switch# configure terminal Switch(config)# router rip Switch(config-router)# passive-interface vlan 1 Switch(config-router)# 68-11 redistribute (RIP) This command is used to redistribute routes from other routing domains into RIP. Use the no command to disable route redistribution from a specific protocol. redistribute PROTOCOL [metric METRIC-VALUE] [route-map MAP-NAME] no redistribute PROTOCOL [metric METRIC-VALUE] [route-map MAP-NAME] Parameters PROTOCOL metric METRIC-VALUE route-map MAP-NAME Specifies the protocol whose routes are to be redistributed. It can be one of the following keywords: bgp (MI and EI Mode Only), connected, ospf (MI and EI Mode Only), static, and isis (MI Mode Only). The static keyword means to redistribute IP static routes. The connected keyword refers to routes that are established automatically by virtue of configuring IP address on an interface. (Optional) Specifies the value to be used as metric for the redistributed routes. The range is from 0 to 16. (Optional) Specifies the route map that is used in the filtering of the routes to be redistributed to the current routing protocol. If not specified, all routes are redistributed. Default By default, this option is disabled. Command Mode Router Configuration Mode. Router Address Family Configuration (RIP) Mode. Command Default Level Level: 12. Usage Guideline If the metric option is not specified or is specified as 0, the following rules are applied: The metric of the redistributed static route or connected route will be 1, if the metric option is not specified, or is specified as 0. The metric of the redistributed route from other protocols to the RIP process will be determined by the default metric command if the metric option is not specified. 705