D-Link DGS-3130 Emulator - Page 106

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline The user should use the aaa new-model command to enable AAA before the authentication and accounting via the AAA method lists take effect. If AAA is disabled, the login user will be authenticated via the local user account table created by the username command. The enable password will be authenticated via the local table which is defined via the enable password command. Example This example shows how to enable the AAA function. Switch#configure terminal Switch(config)# aaa new-model Switch(config)# 8-14 accounting commands This command is used to configure the method list used for command accounting via a specific line. Use the no form of this command to disable do accounting command. accounting commands LEVEL {default | METHOD-LIST} no accounting commands LEVEL Parameters LEVEL default METHOD-LIST Specifies to do accounting for all configure commands at the specified privilege level. Valid privilege level entries are 1 to 15. Specifies to do accounting based on the default method list. Specifies the name of the method list to use. Default By default, this option is disabled. Command Mode Line Configuration Mode. Command Default Level Level: 15. Usage Guideline For accounting via the method list to take effect, enable AAA first by using the aaa new-model command. Create the method list first by using the aaa accounting commands command. If the method list does not exist, the command does not take effect. The user can specify different method lists to account commands at different levels. A level can only have one method list specified. Example This example shows how to enable the command accounting level 15 configure command issued via the console using the accounting method list named "cmd-15" on the console. 102