D-Link DGS-3130 Emulator - Page 829
Interface, Action, Threshold, Current, State, Forwarding, Dropped, Error Disabled, Link Down,
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 829 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# show storm-control interface eth1/0/1-2 Polling Interval : 15 sec Shutdown Retries : Infinite Trap : Disabled Interface Storm Action Threshold Current State eth1/0/1 Broadcast Drop 80/64 % 50% Forwarding eth1/0/1 Multicast Drop 80/64 % 50% Forwarding eth1/0/1 Unicast Drop 80/64 % 50% Forwarding eth1/0/2 Broadcast Shutdown 500/300 pps - Error Disabled eth1/0/2 Multicast Shutdown 500/300 pps - Error Disabled eth1/0/2 Unicast Shutdown 500/300 pps - Error Disabled Total Entries: 6 Switch# Display Parameters Interface Action Threshold Current State The interface ID. The configured action, the possible actions are: Drop, Shutdown, None. The configured threshold. The actual traffic rate which is currently flowing though the interface. Its unit may be percentage, kbps, PPS based on the configured meter mode. Because hardware can only counts by PPS, this value of this filed may be a rough value for percentage and kbps. The current state of storm control on a given interface for a given traffic type. The possible states are: Forwarding: No storm event has been detected. Dropped: A storm event has occurred and the storm traffic exceeding the threshold is dropped. Error Disabled: The port is disabled due to a storm. Link Down: The port is physically linked down. Inactive: Indicates that storm control is not enabled for the given traffic type. 825
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/829.png)