D-Link DGS-3130 Emulator - Page 217
netbios-node-type
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
HOURS MINUTES infinite DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide (Optional) Specifies the number of hours for the duration of the lease. (Optional) Specifies the number of minutes for the duration of the lease. Specifies that the lease time is unlimited. Default By default, the lease time is 1 day. Command Mode DHCP Pool Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the duration of the lease for an IP address that is assigned from the address pool. The least setting will not be inherited from the parent address pool. Example This example shows how to configure the lease in the address pool "pool1" to 1 day. Switch# configure terminal Switch(config)# ip dhcp pool pool1 Switch(config-dhcp-pool)# lease 1 This example shows how to configure the lease in the address pool "pool1" to 1 hour. Switch# configure terminal Switch(config)# ip dhcp pool pool1 Switch(config-dhcp-pool)# lease 0 1 19-20 netbios-node-type This command is used to configure the NetBIOS node type for Microsoft DHCP clients. Use the no form of this command to remove the configuration of the NetBIOS node type. netbios-node-type NTYPE no netbios-node-type Parameters NTYPE Specifies the NetBIOS node type of the Microsoft client. The following are the valid types: b-node - Broadcast p-node - Peer-to-peer m-node - Mixed h-node - Hybrid 213