D-Link DGS-3130 Emulator - Page 17
login Line
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Command Default Level Level: 1. Usage Guideline Use this command to change the login account. Three attempts are allowed to log into the Switch's interface. When using Telnet, if all attempts fail, access will return to the command prompt. If no information is entered within 60 seconds, the session will return to the state when logged out. Example This example shows how to login with username "user1". Switch# login Username: user1 Password: xxxxx Switch# 2-6 login (Line) This command is used to set the line login method. Use the no form of this command to disable the login. login [local] no login Parameters local (Optional) Specifies that the line login method will be local. Default By default, there is no login method configured for the console line. By default, there is a login method (by password) configured for the Telnet line. By default, there is a login method (by password) configured for the SSH line. Command Mode Line Configuration Mode. Command Default Level Level: 15. 13