D-Link DGS-3130 Emulator - Page 333

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#show ip arp inspection interfaces Interface Trust State Rate(pps) Burst Interval eth1/0/1 untrusted 15 1 eth1/0/2 untrusted 15 1 eth1/0/3 untrusted 15 1 eth1/0/4 untrusted 15 1 eth1/0/5 untrusted 15 1 eth1/0/6 untrusted 15 1 eth1/0/7 untrusted 15 1 eth1/0/8 untrusted 15 1 eth1/0/9 untrusted 15 1 eth1/0/10 trusted None 1 eth1/0/11 untrusted 15 1 eth1/0/12 untrusted 15 1 eth1/0/13 untrusted 15 1 eth1/0/14 untrusted 15 1 eth1/0/15 untrusted 15 1 eth1/0/16 untrusted 15 1 eth1/0/17 untrusted 15 1 eth1/0/18 untrusted 15 1 eth1/0/19 untrusted 15 1 eth1/0/20 untrusted 15 1 eth1/0/21 untrusted 15 1 CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All Display Parameters Interface Trust State Rate (pps) Burst Interval The name of interface that enable ARP inspection. The state of the interface. trusted: This interface is ARP inspection trusted port, all ARP packet will be legal and not be authorized. untrusted: This interface is ARP inspection untrusted port, all ARP packet will be authorized. The upper limit on the number of incoming packets processed per second. The consecutive interval in seconds over which the interface is monitored for the high rate of the ARP packets. 30-13 show ip arp inspection log This command is used to display the ARP inspection log buffer. show ip arp inspection log Parameters None. Default None. 329