D-Link DGS-3130 Emulator - Page 781
snmp-server location
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 781 highlights
warmstart DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide (Optional) Specifies to control the sending of SNMP warmStart notifications. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command controls the sending of SNMP standard notification traps. To enable the sending of notification traps, the global setting must be enabled too. Example This example shows how to enable the router to send all SNMP traps to the host 10.9.18.100 using the community string defined as public. Switch# configure terminal Switch(config)# snmp-server enable traps Switch(config)# snmp-server enable traps snmp Switch(config)# snmp-server host 10.9.18.100 version 2c public Switch(config)# This example shows how to enable the SNMP authentication traps. Switch# configure terminal Switch(config)# snmp-server enable traps snmp authentication Switch(config)# 76-17 snmp-server location This command is used to configure the system's location information. Use the no form of this command to remove the setting. snmp-server location TEXT no snmp-server location Parameters TEXT Specifies the string that describes the system location information. The maximum length is 255 characters. The syntax is a general string that allows spaces. Default None. Command Mode Global Configuration Mode. 777
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/781.png)