D-Link DGS-3130 Emulator - Page 622
show power-saving
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 622 highlights
Parameters DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide PROFILE-NAME Specifies the name of the time range profile to be configured. The maximum length is 32 characters. Default None. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to add or delete a time range profile for the port shutdown schedule. When the schedule is up, the specific port will be disabled. Example This example shows how to add a time range profile for the port shutdown schedule. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# power-saving shutdown time-range off-duty Switch(config-if)# 59-7 show power-saving This command is used to display the power saving configuration information. show power-saving [link-detection] [length-detection] [dim-led] [port-shutdown] [hibernation] [eee] Parameters link-detection length-detection dim-led port-shutdown hibernation eee (Optional) Specifies to display the link detection state. (Optional) Specifies to display the cable length detection state. (Optional) Specifies to display the dim LED state. (Optional) Specifies to display the port shutdown state. (Optional) Specifies to display the hibernation state. (Optional) Specifies to display the EEE state. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. 618