D-Link DGS-3130 Emulator - Page 486
Jumbo Frame Commands
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 486 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 45. Jumbo Frame Commands 45-1 max-rcv-frame-size This command is used to configure the maximum Ethernet frame size allowed. Use the no form of this command to revert to the default setting. max-rcv-frame-size BYTES no max-rcv-frame-size Parameters BYTES Specifies the maximum Ethernet frame size allowed. The range is from 64 to 9216 bytes. Default By default, this value is 1536 bytes. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is available for physical ports configuration. Oversize frames will be dropped and checks are carried out on ingress ports. Use this command to transfer large frames or jumbo frames through the Switch to optimize server-to-server performance. Example This example shows how to configure the maximum received Ethernet frame size to be 6000 bytes on port 1/0/3. Switch#configure terminal Switch(config)#interface ethernet 1/0/3 Switch(config-if)#max-rcv-frame-size 6000 Switch(config-if)# 482