D-Link DGS-3130 Emulator - Page 72

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide prompt STRING no prompt Parameters STRING Specifies a string to define the customized prompt. The prompt will be based on the specified characters or the following control characters. The space character in the string is ignored. % h - encode the SNMP server name. %s - space %% - encode the % symbol Default By default, the string encodes the SNMP server name. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use the prompt command to customize the CLI prompt. If the user selects to encode the SNMP server name as the prompt, only the first 15 characters are encoded. The prompt can only display up to 15 characters. The privileged level character will appear as the last character of the prompt. The character is defined as follows.  > - Represents user level.  # - Represents privileged user level. Example This example shows how to change the prompt to "BRANCH A" using administrator. Switch# configure terminal Switch(config)# prompt BRANCH%sA BRANCH A(config)# 5-4 enable password This command is used to setup enable password to enter different privileged levels and use the no to return the password to the empty string. enable password [level PRIVILEGE-LEVEL] [0 | 7 | 15] PASSWORD no enable password [level PRIVILEGE-LEVEL] Parameters level PRIVILEGE-LEVEL (Optional) Specifies the privilege level for the user. The privilege level is between 1 and 15. If this argument is not specified in the command or the no form of the command, the privilege level defaults to 15 (traditional enable privileges). 68