D-Link DGS-3130 Emulator - Page 498

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# port-channel load-balance src-ip Switch(config)# 47-6 show channel-group This command is used to display the channel group information. show channel-group [channel [CHANNEL-NO] {detail | neighbor} | load-balance | sys-id] Parameters channel CHANNEL-NO detail neighbor load-balance sys-id (Optional) Specifies to display information for the specified port-channels. (Optional) Specifies the channel group ID. (Optional) Specifies to display detailed channel group information. (Optional) Specifies to display neighbor information. (Optional) Specifies to display the load balance information. (Optional) Specifies to display the system identifier that is being used by LACP. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline If a port-channel number is not specified, all port-channels will be displayed. If the channel, load-balance and sysid keywords are not specified with the show channel-group command, only summary channel-group information will be displayed. Example This example shows how to display the detailed information of all port-channels. 494