D-Link DGS-3130 Emulator - Page 201

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#show ip dhcp relay information option mac-format Case Delimiter Delimiter Number Example : Uppercase : Hyphen : 5 : AA-BB-CC-DD-EE-FF Switch# 18-28 ip dhcp relay This command is used to enable the DHCP relay on the interface. Use the no form of this command to disable the function. ip dhcp relay no ip dhcp relay Parameters None. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enable or disable the DHCP relay on physical ports or port channel interfaces. Example This example shows how to enable the Switch to process DHCP client unicast packets. Switch#configure terminal Switch(config)#service dhcp Switch(config)#interface ethernet 1/0/2 Switch(config-if)#ip dhcp relay Switch(config-if)# 197