D-Link DGS-3130 Emulator - Page 560

Parameters 1 2 DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Specifies that the version of the MLD general query sent by MLD snooping querier is 1. Specifies that the version of the MLD general query sent by MLD snooping querier is 2. Default By default, the version number is 2. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The command is only available for VLAN interface configuration. Example This example shows how to configure the query version to be 1 on VLAN 1000. Switch# configure terminal Switch(config)# vlan 1000 Switch(config-vlan)# ipv6 mld snooping query-version 1 Switch(config-vlan)# 52-14 ipv6 mld snooping rate-limit This command is used to configure the upper limit of ingress MLD control packets per second. Use the no form of this command to disable the rate limit. ipv6 mld snooping rate-limit NUMBER no ipv6 mld snooping rate-limit Parameters NUMBER Specifies to configure the rate of the MLD control packet that the Switch can process on a specific interface. The rate is specified in packets per second. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. 556