Home » D-Link Manuals » Wireless » D-Link DGS-3130 » Manual Viewer

D-Link DGS-3130 Emulator - Page 859

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide, IP-ADDRESS, IPV6-ADDRESS, SEVERITY-

Add to My Manuals
Save this manual to your list of manuals

Page 859 highlights

Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline An existing discriminator can be configured. The later setting will overwrite the previous setting. Associate a discriminator with the logging buffered and the logging server command. Example This example shows how to create a discriminator named "buffer-filter" which specifies two sub-filters, one based on the severity level and the other based on the facility. Switch# configure terminal Switch(config)# logging discriminator buffer-filter facility includes STP severity includes 14,6 Switch(config)# 85-6 logging server This command is used to create a SYSLOG server host to log the system messages or debug output. Use the no command to remove a SYSLOG server host. logging server {IP-ADDRESS | IPV6-ADDRESS} [severity {SEVERITY-LEVEL | SEVERITY-NAME}] [facility {FACILITY-NUM | FACILITY-NAME}] [discriminator NAME] [port UDP-PORT] no logging server {IP-ADDRESS | IPV6-ADDRESS} Parameters IP-ADDRESS IPV6-ADDRESS SEVERITY-LEVEL SEVERITY-NAME FACILITY-NUM FACILITY-NAME Specifies the IP address of the SYSLOG server host. Specifies the IPv6 address of the log server host. (Optional) Specifies the severity level of system messages. The messages at that severity level or a more severe level will be logged to message buffers. This value must be between 0 and 7. 0 is the most severe level. The corresponding severity levels are listed together with their respective severity names: emergencies (0), alerts (1), critical (2), errors (3), warnings (4), notifications (5), informational (6), debugging (7). If not specified, the default severity level is warnings (4). (Optional) Specifies the severity level name of system messages. The corresponding severity levels are listed together with their respective severity names: emergencies (0), alerts (1), critical (2), errors (3), warnings (4), notifications (5), informational (6), debugging (7). (Optional) Specifies a decimal value from 0 to 23 to represent the facility. If not specified, the default facility is local7 (23). See the usage guideline for more information. (Optional) Specifies a facility name to represent the facility. If not specified, the default facility is local7 (23). See the usage guideline for more information. 855

Match case Limit results 1 per page

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide

855

Default

None.

Command Mode

Global Configuration Mode.

Command Default Level

Level: 12.

Usage Guideline

An existing discriminator can be configured. The later setting will overwrite the previous setting. Associate a

discriminator with the logging buffered and the logging server command.

Example

This example shows how to create a discriminator nam

ed “buffer

filter” which specifies

two sub-filters, one based

on the severity level and the other based on the facility.

Switch# configure terminal

Switch(config)# logging discriminator buffer-filter facility includes STP severity includes 1-

4,6

Switch(config)#

85-6

logging server

This command is used to create a SYSLOG server host to log the system messages or debug output. Use the

command to remove a SYSLOG server host.

logging server {

IP-ADDRESS

IPV6-ADDRESS

} [severity {

SEVERITY-LEVEL

SEVERITY-NAME

}] [facility

{

FACILITY-NUM

FACILITY-NAME

}] [discriminator

NAME

] [port

UDP-PORT

]

no logging server {

IP-ADDRESS

IPV6-ADDRESS

}

Parameters

IP-ADDRESS

Specifies the IP address of the SYSLOG server host.

IPV6-ADDRESS

Specifies the IPv6 address of the log server host.

SEVERITY-LEVEL

(Optional) Specifies the severity level of system messages. The messages at

that severity level or a more severe level will be logged to message buffers. This

value must be between 0 and 7. 0 is the most severe level. The corresponding

severity levels are listed together with their respective severity names:

emergencies (

), alerts (

), critical (

), errors (

), warnings (

), notifications (

informational (

), debugging (

). If not specified, the default severity level is

warnings (

SEVERITY-NAME

(Optional) Specifies the severity level name of system messages. The

corresponding severity levels are listed together with their respective severity

names:

emergencies

(0),

alerts

(1),

critical

(2),

errors

(3),

warnings

(4),

notifications

(5),

informational

(6),

debugging

(7).

FACILITY-NUM

(Optional) Specifies a decimal value from 0 to 23 to represent the facility. If not

specified, the default facility is local7 (

). See the usage guideline for more

information.

FACILITY-NAME

(Optional) Specifies a facility name to represent the facility. If not specified, the

default facility is

local7

(23). See the usage guideline for more information.