D-Link DGS-3130 Emulator - Page 801

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline Use this command to enable or disable the sending of notification traps. If no optional parameter is specified in the no form of this command, both STP notification types are disabled. Example This example shows how to enable the router to send all STP traps to the host 10.9.18.100 using the community string defined as public. Switch# configure terminal Switch(config)# snmp-server enable traps Switch(config)# snmp-server enable traps stp Switch(config)# snmp-server host 10.9.18.100 version 2c public Switch(config)# 78-6 spanning-tree mst configuration This command is used to enter the MST configuration mode and configure the MSTP region. Use the no form of this command to revert all settings in the MST configuration mode to the default settings. spanning-tree mst configuration no spanning-tree mst configuration Parameters None. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to enter the MST configuration mode. Example This example shows how to enter the MST configuration mode. Switch#configure terminal Switch(config)#spanning-tree mst configuration Switch(config-mst)# 78-7 instance This command is used to map VLANs to an MST instance. Use the no instance INSTANCE-ID command to remove the specified MST instance. Use the no instance INSTANCE-ID vlans VLAND-ID [, | -] command to return the VLANs to the default instance (CIST). 797