D-Link DGS-3130 Emulator - Page 251
DHCPv6 Client Commands
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 22. DHCPv6 Client Commands 22-1 clear ipv6 dhcp client This command is used to restart the DHCPv6 client on an interface. clear ipv6 dhcp client INTERFACE-ID Parameters INTERFACE-ID Specifies the VLAN interface to restart the DHCPv6 client. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 12. Usage Guideline This command restarts the IPv6 DHCP client on the specified interface. Example This example shows how to restart the DHCPv6 client for interface VLAN 1. Switch# clear ipv6 dhcp client vlan 1 Switch# 22-2 ipv6 dhcp client pd This command is used to enable the Dynamic Host Configuration Protocol (DHCP) IPv6 client process to request the prefix delegation through a specified interface. Use the no form of this command to disable the request. ipv6 dhcp client pd {PREFIX-NAME} [rapid-commit] no ipv6 dhcp client pd Parameters PREFIX-NAME rapid-commit Specifies the IPv6 general prefix name with a maximum of 12 characters. Specifies to use a two-message exchange instead of the standard four-message exchange between the Requesting Router (RR) and the Delegating Router (DR) to obtain the network configuration settings from the DHCPv6 Server. Default By default, this option is disabled. 247
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/251.png)