D-Link DGS-3130 Emulator - Page 805
spanning-tree mst max-hops, 12 spanning-tree global state
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 805 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 78-11 spanning-tree mst max-hops This command is used to configure the MSTP maximum hop count. Use the no form of this command to revert to the default setting. spanning-tree mst max-hops HOP-COUNT no spanning-tree mst max-hops Parameters HOP-COUNT Specifies the MSTP maximum hop count. The value is from 1 to 40. Default By default the MSTP maximum hop count is 20. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the MSTP maximum hop count. Example This example shows how to configure the MSTP maximum hop count. Switch#configure terminal Switch(config)#spanning-tree mst max-hops 19 Switch(config)# 78-12 spanning-tree global state This command is used to enable or disable the STP's global state. Use the no form of this command to disable the STP's global state. spanning-tree global state {enable | disable} no spanning-tree global state Parameters enable disable Specifies to enable the STP's global state. Specifies to disable the STP's global state. Default By default, this option is disabled. 801
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/805.png)