D-Link DGS-3130 Emulator - Page 821

value DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Specifies the priority assigned to the switch stacking unit. The range is from 0 to 15. The higher number means a higher priority. 0 indicates disabled. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command configures the ability of a switch to become the Primary Master Box. The value is the preference parameter that allows the user to specify priority of one backup switch over another. The switch with the highest priority value will be chosen to become the Primary Master Box if the active Primary Master Box fails. Example This example shows how to configure the priority of the switch unit 2 to 10. Switch# stack 2 priority 10 Switch# 79-5 show stack This command is used to display the stacking information. show stack Parameters None. Default None. Command Mode User/Privileged EXEC Mode. Command Default Level Level: 1. Usage Guideline This command is used to display the stacking information. 817