D-Link DGS-3130 Emulator - Page 350
show ethernet oam status
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#show ethernet oam configuration interface ethernet 1/0/1 eth1/0/1 Ethernet oam state Mode Dying gasp Critical event Remote loopback OAMPDU : Disabled : Active : Enabled : Enabled : Not Processed Error symbol period event Notify state Threshold Window : Enabled : 1 error symbol : 10 deciseconds Error frame event Notify state Threshold Window : Enabled : 1 error frame : 10 deciseconds Error frame period event Notify state Threshold Window : Enabled : 1 error frame : 1488100 frames Error frame seconds event CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All 32-12 show ethernet oam status This command is used to display the status of the Ethernet OAM function. show ethernet oam status [interface INTERFACE-ID [, | -]] Parameters interface INTERFACE-ID , - (Optional) Specifies the interface ID to display. The allowed interfaces only include physical ports. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. 346