D-Link DGS-3130 Emulator - Page 129

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to display the brief information of the IP interface. Switch#show ip interface brief Interface ---------vlan 1 mgmt_ipif IP Address 10.90.90.90 192.168.0.1 Link Status ----------up down Total Entries: 2 Switch# This example shows how to display the IP interface information for VLAN 1. Switch#show ip interface vlan 1 Interface vlan 1 is enabled, Link status is up IP address is 10.90.90.90/8 (Manual) ARP timeout is 240 minutes. IP MTU is 1500 bytes Helper Address is not set Proxy ARP is disabled IP Local Proxy ARP is disabled IP Directed Broadcast is disabled gratuitous-send is disabled, interval is 0 seconds Total Entries: 1 Switch# This example shows how to display the IP interface information for loopback 1. Switch#show ip interface loopback 1 Interface loopback1 is enabled IP address is 192.168.1.1/24 (Manual) Total Entries: 1 Switch# 9-12 ip directed-broadcast This command is used to enable the conversion of IP directed broadcasts received by the interface to physical broadcasts when the destination network is directly connected to the Switch. Use the no form of this command to disable the conversion. ip directed-broadcast no ip directed-broadcast Parameters None. 125