D-Link DGS-3130 Emulator - Page 297
Digital Diagnostics Monitoring DDM, Commands
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 26. Digital Diagnostics Monitoring (DDM) Commands 26-1 show interfaces transceiver This command is used to display the current SFP/SFP+ module operating parameters. show interfaces [INTERFACE-ID [, | -] transceiver [detail] Parameters INTERFACE-ID , detail (Optional) Specifies multiple interfaces for transceiver monitoring status display. If no interface ID is specified, transceiver monitoring statuses on all valid interfaces are displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. (Optional) Specifies to display more detailed information. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the current SFP/SFP+ module operating transceiver monitoring parameters values for specified ports. Example This example shows how to display current operating parameters for all ports valid for transceiver monitoring. 293
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/297.png)