D-Link DGS-3130 Emulator - Page 457

Parameters DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide MAC-ADDRESS vlan VLAN-ID IP-ADDRESS interface INTERFACE-ID , - Specifies the MAC address of the IP-to-MAC address binding entry. Specifies the VLAN that the valid host belongs to. Specifies the IP address of the IP-to-MAC address binding entry. Specifies the port that the valid host is connected. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to create a static binding entry used for IP source guard checking. Use the no command to delete a static binding entry. The parameters specified for the command must exactly match the configured parameters to be deleted. If the MAC address and the VLAN for the configured entry already exist, the existing binding entry is updated. The interface specified for the command can be a physical port or a port-channel interface. Example This example shows how to configure an IP Source Guard entry with the IP address 10.1.1.1 and MAC address 00-01-02-03-04-05 at VLAN 2 on ethernet 1/0/10. Switch# configure terminal Switch(config)# ip source binding 00-01-02-03-04-05 vlan 2 10.1.1.1 interface ethernet 1/0/10 Switch(config)# This example shows how to delete an IP Source Guard entry with the IP address 10.1.1.1 and MAC address 0001-02-03-04-05 at VLAN 2 on ethernet 1/0/10. Switch# configure terminal Switch(config)# no ip source binding 00-01-02-03-04-05 vlan 2 10.1.1.1 interface ethernet 1/0/10 Switch(config)# 40-3 show ip source binding This command is used to display an IP-source guard binding entry. show ip source binding [IP-ADDRESS] [MAC-ADDRESS] [dhcp-snooping | static] [vlan VLAN-ID] [interface INTERFACE-ID [, | -]] 453