D-Link DGS-3130 Emulator - Page 181

SENTENCE vendor2 expert-udf DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide | 2 | 8 | 0 | 6 | MAC Address | | 1 byte | 1 byte | 1 byte | 1 byte | 6 bytes | Specifies to use a user-defined string as the remote ID. Space characters are allowed in the string. The remote ID option is formed in the following format: | a. | b. | c. | d. | e. | | 2 | n+2 | 1 | n | User Defined | | 1 byte | 1 byte | 1 byte | 1 byte | Max. 32 bytes | Specifies user the vendor 2. If configures, the remote ID option uses the original format: | a. | b. | c. | | 2 | n | System Name | | 1 byte | 1 byte | n byte | a. Sub-option type: The number 2 indicates that this is the remote ID. b. Length: The length of the value. c. Value: The character string. The system name of the Switch. Specifies to use expert-udf. If configures, the remote ID option uses the original format: | a. | b. | c. | | 2 | n | User Defined | | 1 byte | 1 byte | Max. 251 bytes | a. Sub-option type: The number 2 indicates that this is the remote ID. b. Length: Total length of user-defined string. By default, Length is 0 and no value field. c. Value: Flexible user-defined string that configured through this command and the ip dhcp relay information profile command. The maximum length is 251. Default The Switch's system MAC address is used as the remote ID string. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to select different vendor's remote ID format or configures a user-defined string of ASCII characters to be the remote ID. 177