D-Link DGS-3130 Emulator - Page 361
instance
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide , (Optional) Specifies a series of VLANs, or separate a range of VLANs from a previous range. No space is allowed before and after the comma. - (Optional) Specifies a range of VLANs. No space is allowed before and after the hyphen. Default None. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the VLANs to be protected by the ERPS instance. Example This example shows how to configure the service protected VLAN as 100 to 200 for ERPS instance 1. Switch# configure terminal Switch(config)# ethernet ring g8032 ring2 Switch(config-erps-ring)# port0 interface ethernet 1/0/1 Switch(config-erps-ring)# port1 none Switch(config-erps-ring)# instance 1 Switch(config-erps-ring-instance)# r-aps channel-vlan 20 Switch(config-erps-ring-instance)# inclusion-list vlan-ids 100-200 Switch(config-erps-ring-instance)# 33-7 instance This command is used to create an ERPS instance and enter the ERPS Instance Configuration Mode. Use the no form of this command to remove an ERPS instance. instance INSTANCE-ID no instance INSTANCE-ID Parameters INSTANCE-ID Specifies the identifier of an ERPS instance. This value must be between 1 and 32. Default None. Command Mode ERPS Configuration Mode. 357