D-Link DGS-3130 Emulator - Page 412

Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The specified description corresponds to the MIB object "ifAlias" defined in the RFC 2233. Example This example shows how to add the description "Physical Port 10" to interface eth 1/0/10. Switch# configure terminal Switch(config)# interface ethernet 1/0/10 Switch(config-if)# description Physical Port 10 Switch(config-if)# 38-3 interface This command is used to enter the interface configuration mode for a single interface. Use the no form of this command to remove an interface. interface INTERFACE-ID no interface INTERFACE-ID Parameters INTERFACE-ID Specifies the ID of the interface. The interface ID is formed by interface type and interface number with no spaces in between. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enter the interface configuration mode for a specific interface. The interface ID is formed by the interface type and interface number with no spaces in between. The following keywords can be used for the supported interface types: 408