D-Link DGS-3130 Emulator - Page 194

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# show ip dhcp relay information option-insert Interface Option-Insert vlan 1 Enabled vlan 2 Disabled vlan 3 Not Configured Total Entries: 3 Switch# 18-21 show ip dhcp relay information policy-action This command is used to display the relay option policy action configuration. show ip dhcp relay information policy-action [interface INTERFACE-ID [, | -]] Parameters interface INTERFACE-ID , - (Optional) Specifies to display information related to the interface specified here. Enter the interface's ID after the keyword here. If no interface ID is specified, then information related to all interfaces will be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the relay information option policy action configuration information. Example This example shows how to display relay information Option 82 policy action configuration information for all VLANs. 190