D-Link DGS-3130 Emulator - Page 76

Parameters TCP-PORT DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Specifies the TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the HTTP protocol is 80. Default By default, this port number is 80. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command configures the TCP port number for the HTTP server. Example This example shows how to configure the HTTP TCP port number to 8080. Switch# configure terminal Switch(config)# ip http service-port 8080 Switch(config)# 5-9 ip http timeout-policy idle This command is used to Use the no form of this command to revert to the default setting. ip http timeout-policy idle INT no ip http timeout-policy idle Parameters INT Specifies the idle timeout value. The valid range is from 60 to 36000 seconds. Default By default, this value is 180 seconds. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command configures the idle timeout value of the HTTP server connection. 72