D-Link DGS-3130 Emulator - Page 645
Switch#show ipv6 route summary, Route Source, Networks, Connected, Static, RIPng, SLAAC, Total,
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 645 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide show ipv6 route summary Parameters None. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline When the system provides forwarding services for IPv6 traffic, it is very important and helpful to check the forwarding/routing table to understand what the traffic path will be currently in the network. Example This example shows how to display the current state of the IPv6 routing table. Switch#show ipv6 route summary Route Source Connected Static RIPng BGP OSPF ISIS SLAAC Total Switch# Networks 2 1 7 0 4 2 0 16 641
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/645.png)
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide
641
show ipv6 route summary
Parameters
None.
Default
None.
Command Mode
User/Privileged EXEC Mode.
Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
When the system provides forwarding services for IPv6 traffic, it is very important and helpful to check the
forwarding/routing table to understand what the traffic path will be currently in the network.
Example
This example shows how to display the current state of the IPv6 routing table.
Switch#show ipv6 route summary
Route Source
Networks
Connected
2
Static
1
RIPng
7
BGP
0
OSPF
4
ISIS
2
SLAAC
0
Total
16
Switch#