D-Link DGS-3130 Emulator - Page 798
show spanning-tree mst
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 798 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide - (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the Spanning Tree configuration for the single spanning tree when in the RSTP or STP-compatible mode. Example This example shows how to display the spanning tree information when STP is enabled. Switch#show spanning-tree Spanning Tree: Enabled Protocol Mode: RSTP Tx-hold-count: 6 NNI BPDU Address: dot1d(01-80-C2-00-00-00) Root ID Priority: 32768 Address: F0-7D-68-34-0A-00 Hello Time: 2 sec, Max Age: 20 sec, Forward Delay: 15 sec Bridge ID Priority: 32768 (priority 32768 sys-id-ext 0) Address: F0-7D-68-34-0A-00 Hello Time: 2 sec, Max Age: 20 sec, Forward Delay: 15 sec, Topology Changes Count: 0 Interface --------eth1/0/1 Role State Cost ---- ----- ---- designated forwarding 200000 Priority Link .Port# Type 128.1 p2p Edge ---edge Switch# 78-3 show spanning-tree mst This command is used to display the information of Multiple Spanning Tree (MST) and instances. show spanning-tree mst {configuration | instance INTANCE-ID [interface INTERFACE-ID]} Parameters configuration Specifies the MST configuration of the equipment. 794
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/798.png)