D-Link DGS-3130 Emulator - Page 642

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Any Configuration Mode. Command Default Level Level: 1. Usage Guideline The routing table gathers routes learned from different protocols. If multiple routes can reach the same network, the one with the best distance and the next hop is reachable will be chosen as the best and set to hardware for routing of packets. They are the route entry currently at work. That is, if the route with the best distance is with the unreachable next hop, then the route with the next preferred distance will be chosen. Example This example shows how to display the routing table. Switch#show ip route Code: C - connected, S - static, R - RIP, B - BGP, I - IS-IS, O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, * - candidate default Gateway of last resort is not set S 170.10.0.0/16 [60/1] via 11.0.0.2, vlan 11 O 1.0.0.0/8 [80/2] via 11.0.0.1, vlan 11 O 2.0.0.0/8 [80/2] via 11.0.0.1, vlan 11 C 11.0.0.0/8 is directly connected, vlan 11 O 12.0.0.0/8 [80/3] via 11.0.0.1, vlan 11 O 13.0.0.0/8 [80/3] via 11.0.0.1, vlan 11 O 17.0.0.0/8 [80/3] via 11.0.0.1, vlan 11 O 18.0.0.0/8 [80/3] via 11.0.0.1, vlan 11 O 30.0.0.0/8 [80/2] via 11.0.0.1, vlan 11 O 40.0.0.0/8 [80/3] via 11.0.0.1, vlan 11 I 41.0.0.0/8 [116/10] via 11.0.0.2, vlan 11 R 105.100.0.0/24 [100/2] via 11.0.0.5, vlan 11 C 107.100.0.0/16 is directly connected, vlan 1 C 172.18.64.0/21 is directly connected, mgmt_ipif R 212.254.254.0/24 [100/2] via 11.0.0.254, vlan 11 Total Entries: 15 Switch# 62-11 show ip route summary This command is used to display the brief information for the working routing entries. show ip route summary Parameters None. 638