D-Link DGS-3130 Emulator - Page 363
sub-ring, 10 sub-ring instance
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch(config)#ethernet ring g8032 major-ring Switch(config-erps-ring)#port0 interface ethernet 1/0/1 Switch(config-erps-ring)#port1 none Switch(config-erps-ring)#instance 1 Switch(config-erps-ring-instance)#level 6 Switch(config-erps-ring-instance)# 33-9 sub-ring This command is used to specify the sub-ring default instance of a physical ring default instance. Use the no form of this command remove the sub-ring default instance of a physical ring default instance. sub-ring SUB-RING-NAME no sub-ring SUB-RING-NAME Parameters SUB-RING-NAME Specifies the G8032 sub-ring's name. Default None. Command Mode ERPS Configuration Mode. Command Default Level Level: 12. Usage Guideline Configure a sub-ring connected to another ring. This command is applied on the interconnection node. Example This example shows how to configure the physical ring named "ring2" as a sub-ring of "ring1". Switch# configure terminal Switch(config)# ethernet ring g8032 ring2 Switch(config-erps-ring)# exit Switch(config)# ethernet ring g8032 ring1 Switch(config-erps-ring)# sub-ring ring2 Switch(config-erps-ring)# 33-10 sub-ring instance This command is used to specify the sub-ring instance of a physical ring instance. Use the no form of this command to remove the sub-ring instance of a physical ring instance. sub-ring instance INSTANCE-ID no sub-ring instance INSTANCE-ID 359