D-Link DGS-3130 Emulator - Page 207
client-identifier
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# ip dhcp class Customer-A Switch(config-dhcp-class)# option 82 hex 1234 * Switch(config-dhcp-class)# exit Switch(config)# ip dhcp class Customer-B Switch(config-dhcp-class)# option 82 hex 5678 * Switch(config-dhcp-class)# exit Switch(config)# ip dhcp pool srv-pool1 Switch(config-dhcp-pool)# network 172.28.5.0/24 Switch(config-dhcp-pool)# class Customer-A Switch(config-dhcp-pool-class)# address-range 172.28.5.1 172.28.5.12 witch(config-dhcp-pool-class)# exit Switch(config-dhcp-pool)# class Customer-B Switch(config-dhcp-pool-class)# address-range 172.28.5.18 172.28.5.32 Switch(config-dhcp-pool-class)# This example shows how a DHCP class Service-A is configured and defined with a DHCP Option 60 matching pattern 0x112233 and 0x102030. Another class Service-B is configured and defined with a DHCP Option 60 matching pattern 0x556677 and 0x506070. A class Default-class is configured with no option hexadecimal command. These defined classes are used in the relay pool "pool1". The class Service-A is associated with relay target 10.2.1.2 and the class Service-B is associated with relay target 10.2.1.5. The class Default-class is associated with the relay target 10.2.1.32. Switch# configure terminal Switch(config)# ip dhcp class Service-A Switch(config-dhcp-class)# option 60 hex 112233 Switch(config-dhcp-class)# option 60 hex 102030 Switch(config-dhcp-class)# exit Switch(config)# ip dhcp class Service-B Switch(config-dhcp-class)# option 60 hex 556677 Switch(config-dhcp-class)# option 60 hex 506070 Switch(config-dhcp-class)# exit Switch(config)# ip dhcp class Default-class Switch(config-dhcp-class)# exit Switch(config)# ip dhcp pool pool1 Switch(config-dhcp-pool)# relay source 172.19.18 255.255.255.0 Switch(config-dhcp-pool)# class Service-A Switch(config-dhcp-pool-class)# relay target 10.2.1.2 Switch(config-dhcp-pool-class)# exit Switch(config-dhcp-pool)# class Service-B Switch(config-dhcp-pool-class)# relay target 10.2.1.5 Switch(config-dhcp-pool)# exit Switch(config-dhcp-pool)# class Default-class Switch(config-dhcp-pool-class)# relay target 10.2.1.32 Switch(config-dhcp-pool)# 19-7 client-identifier This command is used to specify the unique DHCP client ID of the manual binding entry in a DHCP address pool. Use the no form of this command to remove the specification of the client identifier. client-identifier IDENTIFIER no client-identifier 203