D-Link DGS-3130 Emulator - Page 629
private-vlan association, private-vlan synchronize
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 629 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 61-2 private-vlan association This command is used to associate secondary VLANs with a primary VLAN. Use the no form of this command to remove the association of secondary VLANs with the primary VLAN. private-vlan association {add SECONDARY-VLAN-ID [, | -] | remove SECONDARY-VLAN-ID [, | -]} no private-vlan association Parameters add SECONDARY-VLAN-ID Specifies to add the association of the specified secondary VLANs with the primary VLAN. The valid ID range of secondary VLAN is from 2 to 4094. remove SECONDARYVLAN-ID Specifies to remove the association of the specified secondary VLANs with the primary VLAN. , (Optional) Specifies a series of VLANs, or separate a range of VLANs from a previous range. No space is allowed before and after the comma. - (Optional) Specifies a range of VLANs. No space is allowed before and after the hyphen. Default None. Command Mode VLAN Configuration Mode. Command Default Level Level: 12. Usage Guideline Only one isolated VLAN can be associated with the primary VLAN. Multiple community VLANs can be associated with the primary VLAN. A secondary VLAN can only be associated with one primary VLAN. Example This example shows how to associate secondary VLAN 1001 and secondary VLAN 1002 with the primary VLAN 1000. Switch# configure terminal Switch(config)# vlan 1000 Switch(config-vlan)# private-vlan association add 1001-1002 Switch(config-vlan)# 61-3 private-vlan synchronize This command is used to synchronize secondary VLANs to have the same mapping MST ID as the primary VLAN. private-vlan synchronize Parameters None. 625