D-Link DGS-3130 Emulator - Page 678

Parameters DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide QUANTUM1 ...QUANTUM8 Specifies the quantum (frame length count) value of every queue for weighted round-robin scheduling. Default By default, each quantum value is 1. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The configuration of this command takes effect when the scheduling mode is in the WDRR mode. Use the mls qos scheduler wdrr command to change the scheduling mode to WDRR mode. Example This example shows how to configure the queue quantum of the WDRR scheduling mode, queue quantum of queue 0, queue 1, queue 2, queue 3, queue 4, queue 5, queue 6, queue 7 are 1, 2, 3, 4, 5, 6, 7, 8 respectively on ethernet 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# mls qos scheduler wdrr Switch(config-if)# wdrr-queue bandwidth 1 2 3 4 5 6 7 8 Switch(config-if)# 63-29 wrr-queue bandwidth This command is used to set the queue weight in the WRR scheduling mode. Use the no form of this command to revert to the default setting. wrr-queue bandwidth WEIGHT1...WEIGHT8 no wrr-queue bandwidth Parameters WEIGHT1 ...WEIGHT8 Specifies the weight (frame count) value of every queue for weighted round-robin scheduling. Default By default, the weight value for WEIGHT1 to WIGHT7 is 1. By default, the weight value for WEIGHT8 is 0. Command Mode Interface Configuration Mode. 674