D-Link DGS-3130 Emulator - Page 524
This example shows how to display information about neighboring devices learned by LLDP on eth1/0/9
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 524 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline This command display the information learned from the neighbor devices. Example This example shows how to display information about neighboring devices learned by LLDP on eth1/0/9 in detailed mode. Switch# show lldp neighbor interface eth1/0/9 detail Port ID : eth1/0/9 Remote Entities Count : 1 Entity 1 Chassis ID Subtype : MAC Address Chassis ID : 00-01-02-03-04-05 Port ID Subtype : Local Port ID : eth1/0/5 Port Description : RMON Port System Name : Switch1 System Description : Stackable Ethernet Switch System Capabilities Supported : Repeater, Bridge System Capabilities Enabled : Repeater, Bridge Management Address Count : 0 (None) Port VLAN ID : 0 PPVID Entries Count : 0 (None) VLAN Name Entries Count : 0 (None) Protocol ID Entries Count : 0 (None) MAC/PHY Configuration/Status : (None) Power Via MDI : (None) Link Aggregation : (None) Maximum Frame Size : 0 Unknown TLVs Count : 0 (None) LLDP-MED capabilities : LLDP-MED device class : Endpoint device class III LLDP-MED capabilities support : LLDP-MED capabilities : Support Network Policy : Support Location identification : Not Support Extended power via MDI : Support Inventory : Support LLDP-MED capabilities enabled : LLDP-MED capabilities : Enabled Network Policy : Enabled Location identification : Enabled Extended power via MDI : Enabled Inventory : Enabled Extended power via MDI : Power device type : PD device Power Source : from PSE Power request : 8 watts Network policy : Application type : Voice 520
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/524.png)