D-Link DGS-3130 Emulator - Page 365
port0
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 12. Usage Guideline To change the profile association, deactivate the ERPS instance first. Example This example shows how to configure the guard timer to 700 milliseconds, hold-off timer to 1, WTR timer to 1 minutes for profile "campus", and then associate instance 1 and 2 with the profile. Switch# configure terminal Switch(config)# ethernet ring g8032 profile campus Switch(config-erps-ring-profile)# timer guard 700 Switch(config-erps-ring-profile)# timer hold-off 1 Switch(config-erps-ring-profile)# timer wtr 1 Switch(config-erps-ring-profile)#exit Switch(config)# ethernet ring g8032 ring1 Switch(config-erps-ring)# port0 interface eth3/0/1 Switch(config-erps-ring)# port1 interface eth3/0/2 Switch(config-erps-ring)# instance 1 Switch(config-erps-ring-instance)# profile campus Switch(config-erps-ring-instance)#exit Switch(config-erps-ring)# exit Switch(config)# ethernet ring g8032 ring2 Switch(config-erps-ring)# exit Switch(config)# ethernet ring g8032 ring1 Switch(config-erps-ring)# sub-ring ring2 Switch(config-erps-ring)# exit Switch(config)# ethernet ring g8032 ring2 Switch(config-erps-ring)# port0 interface eth3/0/3 Switch(config-erps-ring)# port1 none Switch(config-erps-ring)# instance 2 Switch(config-erps-ring-instance)# profile campus Switch(config-erps-ring-instance)# 33-12 port0 This command is used to specify the first ring port of a physical ring. Use the no form of this command to remove the first ring port setting. port0 interface INTERFACE-ID no port0 Parameters INTERFACE-ID Specifies the interface ID of the configured ring port. It can be physical port or port-channel interface. Default None. 361