D-Link DGS-3130 Emulator - Page 550

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 52. Multicast Listener Discovery (MLD) Snooping Commands 52-1 clear ipv6 mld snooping statistics This command is used to clear MLD snooping statistic counters on the Switch. clear ipv6 mld snooping statistics {all | vlan VLAN-ID | interface INTERFACE-ID} Parameters all vlan VLAN-ID interface INTERFACE-ID Specifies to clear IPv6 MLD snooping statistics for all VLANs and all ports. Specifies the VLAN used. If no VLAN is specified, statistics for all VLANs are cleared. Specifies the interface used. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 12. Usage Guideline Use this command to clear MLD snooping statistic counters on the Switch. Example This example shows how to clear all MLD snooping statistics. Switch# clear ipv6 mld snooping statistics all Switch# 52-2 ipv6 mld snooping This command is used to enable MLD snooping. Use the no form of this command to disable MLD snooping. ipv6 mld snooping no ipv6 mld snooping Parameters None. Default MLD snooping is disabled on all VLAN interfaces. 546