D-Link DGS-3130 Emulator - Page 748
crypto pki trustpoint
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 748 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# crypto pki import TP1 pem tftp://10.1.1.2/name/msca password abcd1234 both % Importing CA certificate... Destination filename [name/msca.ca]? Reading file from tftp://10.1.1.2/name/msca.ca Loading name/msca.ca from 10.1.1.2 (via eth1/0/5):! [OK - 1082 bytes] % Importing private key PEM file... Reading file from tftp://10.1.1.2/name/msca.prv Loading name/msca.prv from 10.1.1.2 (via eth1/0/5):! [OK - 573 bytes] % Importing certificate PEM file... Reading file from tftp://10.1.1.2/name/msca.crt Loading name/msca.crt from 10.1.1.2 (via eth1/0/5):! [OK - 1289 bytes] % PEM files import succeeded. Switch(config)# 73-3 crypto pki trustpoint This command is used to declare the trust-point that the Switch will use. Use the no form of this command to delete all certificates and key pairs associated with the trust-point. crypto pki trustpoint NAME no crypto pki trustpoint NAME Parameters NAME Specifies to create a name for the trust-point. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline Use this command to declare a trust-point, which can be a self-signed root certificate authority (CA) or a subordinate CA. Issuing this command will enter the CA-Trust-Point Configuration Mode. Example This example shows how to declare a trust-point "TP1" and specify it is a primary trust-point. 744
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/748.png)