D-Link DGS-3130 Emulator - Page 732

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide show cpu-protect safeguard Parameters None. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command is used to display the settings and status of the Safeguard Engine. Example This example shows how to display the settings and current status of the Safeguard Engine. Switch#show cpu-protect safeguard Safeguard Engine State: Disabled Safeguard Engine Status: Normal Utilization Thresholds: Rising :50% Falling :20% Switch# Display Parameters Safeguard Engine Status Displays the current mode that CPU utilization stays. The possible displayed strings are: Exhausted: If the CPU utilization is higher than the configured rising threshold, it will enter Exhausted Mode and Safeguard Engine will take actions. The Safeguard Engine mechanism ceases till the utilization is lower than the falling threshold. Normal: The Safeguard Engine is not triggered to take actions. 70-6 show cpu-protect sub-interface This command is used to display the rate limit and statistics by sub-interface. show cpu-protect sub-interface {manage | protocol | route} Parameters None. 728